HB211 beacon light

Application field

Apply at sea buoy, inland buoy, beacon, fixed light pile and offshore oilfield derrick signal, etc.

The main functions and characteristics

Based on LED technology, its color in accordance with IALA Recommendations E - 200-1.

The lamp body integration design, chimney, achieve IP68 protection grade.

PC material, UV resistant, shock resistant, resistant to corrosion. Chimney, using the Fresnel circular focus lens case for Marine aluminum alloy material.

With the bird device.

, 256 kinds of light quality, and the adjustable meet IALA requirement.

Light intensity, 25%, 50%, 25%, 50% four gear is adjustable.

Photoelectric automatic control, manual switch.

Humanized design, installation and adjustment process with falling prevention device.

• built-in sealed lead-acid battery, maintenance free, easy to replace.

• no radio frequency, no electromagnetic interference.

, stable operation, low cost.

The main technical parameters

The light source output

The effective intensity > 40 CD

Visual range > 6 miles

The LED color optional Red, amber yellow, green, blue, white

Vertical divergent Angle > 7 degrees

Horizontal divergence Angle of 360 degrees

LED light source

LED a life of 100000 hours or more

work

Light-emitting time > 20 consecutive days (12 hour darkness, 12.5% duty cycle)

Switch the sun illumination threshold of 300 lux + 300 lux

Light quality could satisfy the requirement of IALA 256 species (including normally on, user adjustable)

Electrical source

Provide monocrystalline silicon solar panel power suppl

The maximum output power 6 w * 4

Electricity pool Maintenance-free sealed lead-acid batter

12 v / 24 AH battery capacity

The mechanical structure

The integration of chimney Outdoor uv grade polycarbonate (PC), chassis for Marine aluminum alloy material.

Waterproof grade IP68

Heavy volume 11 KG

Working temperature range - 35 ℃ ~ + 70 ℃

Install chassis size 180 mm pitch circle uniform 4 M12 holes on the 150 mm

Custom external power supply, infrared control

Install and use method

Install the product. Pay attention to the adjustment direction of solar panels, solar panels should be toward the south (northern hemisphere)

The installation, the Angle of the panels with horizontal plane shall be equal to the latitude of the local.

Connected solar panels, plug to the socket on the chassis, and screw down the screws.

Open the battery switch, products can work normally.

Matters needing attention

More than 3 months, do not use this product, the need for a battery charging. Specific methods have two:

1, open the box, take out the battery, the use of external power source to charge batteries.

2, place the product in sunny places, open the battery switch, the use of solar energy charge. electricity

Pool after a full charge the battery switch to shut down.

, working in the product, please do not open any part of the lamp body, prevent dangerous.

This product is a sealing structure, non-professional maintenance personnel do not tear open outfit, once found, the company shall not be

In the warranty.

• please make sure the correct use of this product in accordance with the above method

Common place：