HD810B Aviation Obstruction

Applications

Obstruction light for a wide variety of cranes used in Harbors, Metallurgies, owers (Telecom,GSM), Smokestacks, Buildings and any other potentially hazardous obstructions to air traffic with a steady burning red safety light. 

Main functions and features

l   Use Fresnel lens, high utilization of light, valid keeping light beam in the scope as required.

l   Based on LED technology, low power consumption, and high efficiency.

Lamp housing – Polycarbonate, with good anti-impact strength, thermal stability,high transmittance.

l   Die casting aluminum enclosure with powder-coat paint finishes, providing corrosion  resistance and durability. 

l   EMC Compliance, No RF Radiation.

l   Self-contained compartment, with stainless steel wire which is used to secure the  unit against falling in operation, and ease of mount.

l   Built-in photocell can switch ON/OFF the light at dawn and dusk (optional).

l   Steady burning or flashing type (no need external controller).

l   Extremely Reliable – Major Maintenance Cost Saving.

Specification

Standard

Compliant to the ICAO(Aerodromes Annex 14) and FAA-L810

Vertical degree

≥10°

Light source

LED

Horizontal degree

360°

LED color

Aviation red（Other color can be customized）

Flashing rate

Steady burning or flashing(flashing rate can be selected)

Operating voltage

AC110V~AC240V/DC12-48V

LED life

≥100,000h

Power consumption

6W

On/off level

500Lux

Intensity

≥32.5cd

Alarm output

Customizable(for remote monitoring)

Operating temperature

-40˚C ~ +70˚C

IPProtection

IP65

Relative humidity

10% ~ 95% (no condensing）

Weight

2kg

Material

Base：Die casting aluminum Housing: PC

Installation and operation 

l   Check  whether  the  supply  voltage  does  comply  with  the  rated  voltage  of  the  lamp.

l   The underside of the flange is bolted to the corresponding level of stents, stent

l   platform should have sufficient mechanical strength, but also by our design, special

l   mounting bracket can be customized according to customer installation

location drawings.

l   •Switch on the power, and then the light works.